Get Those Yellow Stains Off Your Boat with Our Rust Remover

July 17, 2018

Summertime is here, and people all over the United States are enjoying some time out on the water in their boats, whether they are fishing, water skiing or just going on general boat rides. Of course, the more you use a boat, the more you need to keep up with cleaning and maintaining it.

One of the more common issues boat owners experience is yellow staining all along the bottom of the boat or along the waterline. Some boaters refer to this problem as “the intercoastal mustache.” Rather than wearing yourself out by trying to buff out the dirty areas with some elbow grease, we encourage you try out Magica Rust Remover, which will get the stains out much easier than most other products you’ll find on the market, especially the muriatic acid used by lots of service companies and boat yards, while also being much easier on the environment.

Chances are, you’ll find lots of products available on the market that advertise themselves as boat cleaners, removing barnacles, algae and general water stains. However, many of these products contain strong concentrations of hydrochloric acid, which gives off toxic fumes and can make those products harder to work with. In addition, this is a type of acid that must be disposed of responsibly, though few people actually bother with this, and will simply throw it into their garbage or, even worse, dump it into the water or on the ground.

Magica does not present these environmental concerns, is much easier to work with and is generally more effective than these HCl-based cleaners. Order some today and keep it in stock in your boathouse for whenever you need to give your boat a good cleaning.

Using Magica Rust Remover on your boat

Using Magica Rust Remover to get rid of the yellow stains on your boat is extremely easy. Simply apply the rust remover (which comes in the form of a gel or a spray; you’ll find the spray easier to work with for this application), wait a few minutes and the stain will fade away. Then all you need to do is rinse the area with water, and you should be good to go! If the stain doesn’t fade away after one application, you might need to try again, but typically once is good enough unless it’s a very heavy stain.

After you’ve applied the Magica, you don’t need to do any rubbing or scrubbing—just let it sit on the stain and do its work before hosing it away. It’s that simple!

If you’re interested in giving Magica a try, we guarantee it will remove any stain, and if you are not completely satisfied with the way Magica performs for you on your boat, we’ll give you a complete refund. Simply return the unused portion with your name and address.

Do you have a boat that’s in need of some TLC? If so, contact the team at Magica, Inc. today to learn more about the benefits of our rust remover.

Categorised in: ,

Left Menu IconMagica, Inc.