How To Prepare a Surface Before Adding Rust Remover

May 15, 2022

Surface preparation for rust is something that many individuals have been ignoring because they don’t know how it works. Here’s how to prepare a surface before adding rust remover to it. 

1. Remove Rust With a Sandpaper

The first step is to remove any rust already on the surface. This can be done with sandpaper. It’s essential to ensure that all of the rust is removed before proceeding to the next step. If any rust spots are left on the surface, it will cause the rust remover not to work as effectively. 

2. Remove Large Rust and Scale Particles

In this step, you will need to remove any significant rust and scale particles on the surface. This can easily be done with a wire brush. It’s essential to ensure that all of the rust and scale particles are removed before proceeding to the next step. The rust and scale particles on the surface will prevent the rust remover from working properly.

3. Degrease the Surface

In this stage, you need to degrease the surface. This can be done with a degreaser. It’s essential to ensure that all grease and oil are removed from the surface before proceeding to the next step. If any grease or oil stains are still on the surface, the rust remover will not be as effective. Because surfaces with grease or oil are not stable, it’s important to get rid of them before applying rust remover.

4. Clean the Surface

The next step is to clean the surface. This can be done with a cleaner. It’s essential to ensure that all of the dirt and grime are removed from the surface before proceeding to the next step. If there are any dirt or grime spots on the surface, rust remover will not operate as well. 

After that, the surface should be allowed to dry. This can be done by letting it air dry or using a towel to dry it. Again, it’s important to make sure that the surface is completely dry before proceeding to the next step. If the surface is not completely dry, it will cause the rust remover not to work as effectively.

5. Allowing Rust Blocker to Penetrate

The final step is to apply rust remover. This can be done with a brush or a sprayer. It’s essential to make sure that the rust remover is evenly applied to the surface. If the rust remover is not evenly applied, it will cause the rust not to be removed as effectively.

Conclusion

Applying rust remover such as Rust Blocker is an excellent way to protect your surfaces from rust. However, it is crucial to follow the steps above to ensure that the rust remover works effectively. Contact Magica, Inc. for more information about rust removers and rust protection.

Categorised in:

Subscribe to Our Blog

First Name

Email Address

Magica, Inc.